Ashburn, VA Change Location

1964 Chevrolet Chevelle for sale by Owner - Mammoth Spring, Arkansas

$45,000 $38,000 USD NEG
1964 Chevrolet Chevelle 1964 Chevrolet Chevelle 1964 Chevrolet Chevelle
  • Price$38,000 USD
  • Odometer0
  • Body Style2DR Hardtop

FOR SALE: 1964 Chevelle
Mammoth Spring, Arkansas

This car is very nice. It is a California
Black Plate car. I have the original 1963
plates that came with the car. American
Muscle Car show at Gateway Raceway (750 cars)
and won two 1st places and one 2nd. While at
the KSHE Car show put it on a chassis dyno
and it made 712 RHP (883hp flywheel) and was
8% lean. No rust, being originally from
California. The paint is a dark blue with a
slight purple hue added to the clear coat.
R&R Chassis of Arnold, MO has installed an
8pt moly cage and is now certified to 8.50 as
of April '06 to keep it legal under 9.90. The
engine is a 4 bolt 406 cu in with AFR 220
heads match ported to the Weiand blower
intake. Comp cams custom grind cam and
springs setup just for this car (weight,
tranny, rear, etc). Comp cams gear drive.
Crower stainless rockers, Comp cams stud
girdle. Aluminum Fab valve covers. Eagle 4340
Pro crank and 4340 H Beam rods under J&E
dished blower pistons Milodon pan. Headers
are Hooker Super Comps that have been Cerma-
coated by JCM Machine in House Springs, MO.
Mufflers are Flow Masters with 3" tubes. The
blower is an 8-71 Weiand unit running at 3%
under for 12 lbs of boost topped with two 750
cfm Demon race carbs that are boost
referenced to the blower and bench flowed.
The intake scoop is custom made from
scratch with three gauges in the rear showing
boost, oil pressure, and vacuum. Moroso 3
vane vacuum pump. A Griffin 2 pass (same as 4
core)aluminum radiator and 17" electric fan.
A CSR electric billet water pump has a custom
made billet manifold with #12 braided line
relocated to the right front radiator support
to keep the front of the motor clean and
uncluttered. Custom aluminum polished
overflow cans for the radiator and vacuum
system are fed by braided stainless are every other line on the
engine. The tranny is a Wise 1.76 Pro Glide
with transbrake behind a 3500 stall coan
Blower converter. 1350 yokes at both ends of
a custom driveshaft came from Transmissions
To Go in Arnold, MO. Miller's Rear Gears in
Valley Park, MO narrowed the 9" Ford 3 inches
and stiffened it with a full length rear
brace, a Strange center section with a light
weight spool and 35 spline axles and added
disk brakes. The adjustable brackets for the
custom made upper and lower control arms to
keep the car in a stock suspension class A
custom anti-roll bar. The fuel tank is an 18
gallon aluminum unit. Barry Grant fuel pump
and 4 port pressure regulator. The car is
street legal and currently has plates on it.
The tires are new and are 10.5 inch MT Drag
Radials on the rear and MT Sportsmans on the
front with Weld Draglite XPs all around.
Kirkey Aluminum Race seats with black
upholstery. MSD 7 Digital programmable
ignition with 45 psi MAP sensor and fiber
optic signal pickup. All new original
equipment wiring in car with all electric
race accessories on its own circuit all
separate from original equipment wiring.
This car is street legal. I have original
hood, seats and gas tank. I have extra tires
and wheels and a spare blower drive belt &
pulley. Other misc. parts
Price reduced from $45,000 to $38000. 870-

We found more like this!
More Similar Ads
Contact Seller

Click to Show

Email Seller
Hide Form -

It’s NOT OK to contact this seller with services or other commercial interests

Please read and agree to the disclaimer before sending

You're about to view a 1964 Chevrolet Chevelle
We Can Notify You When Similar Vehicles Are Listed!

*No spam, easy to unsubscribe.

NationwideLocal Only